Zum Inhalt springen

Land

Best Fermentation Temperature Controller For Homebrew 2022

Best Fermentation Temperature Controller For Homebrew 2022

Keeping your beer at the right temperature during fermentation is a key part of getting those delicious flavors. Fortunately, there’s an easy solution – invest in a good temperature controller.

If you’re thinking of doing just that but aren’t sure where to start, you’ve come to the right place! We’re going to check out seven of the best fermentation temperature controllers for home brewing. We’ll show you how to choose one that’s perfect for your needs.

Elitech STC-1000WiFi Digital Temperature Controller Thermostat Aquarium Home Brewing

Elitech STC-1000 series is the best wifi temperature controller to make our list. Now it has 40% automatically discount, which starts from £29.9.

Temperature Controller

It will connect up to a heater and cooling unit simultaneously, making it easy to fine-tune your fermenter temperature. It runs on a 100/250 VAC, 50/60 Hz power supply, and has a total power consumption of under 5 watts.

It will measure temperatures between -49 and 239 degrees Fahrenheit. The sensor is waterproof, so you can use it to regulate the temperature of your mash or strike water. And it’s replaceable too, so you won’t have to invest in a whole unit when its time is up.

You can choose to display the temperature in Fahrenheit or Celsius. View the target and actual temperature either on the controller display or through the app. There’s an alarm to tell you if the temperature gets below or above your chosen levels.

There’s also an alarm to let you know if the sensor isn’t working correctly. All the alarms incorporate sound, a flashing light, and a message on the display – so you won’t miss them.

You can both set your temperature parameters and view data through the Elitech iCold app or cloud platform.

The unit has a total output load capacity of 1,200 watts. It comes with a standard US plug and a 59-inch power cord. That’s on the short side, so you may find you need to use it with an extension lead.

  • Control the temperature of your fermenter remotely using the Elitech iCold app
  • The sensor is replaceable, so you won’t have to buy a whole new unit if it malfunctions
  • Alarms are activated if the temperature moves outside the pre-set range, or if there’s a problem with the sensor

Product List: https://www.elitecheu.com/search?type=product&q=STC-1000pro

40% OFF Starts From £29.9

Vorheriger Artikel Why HVAC Maintenance Is Important
Nächster Artikel Benutzerhandbuch für Tempop M2000 Luftqualitätsmonitor der 2. Generation

Hinterlasse einen Kommentar

Kommentare müssen vor der Veröffentlichung genehmigt werden

* Benötigte Felder

Produkte vergleichen

{"one"=>"Wählen Sie 2 oder 3 Artikel zum Vergleich aus", "other"=>"{{ count }} von 3 ausgewählten Elementen"}

Wählen Sie das erste zu vergleichende Element aus

Wählen Sie das zweite Element zum Vergleichen aus

Wählen Sie das dritte Element zum Vergleichen aus

Vergleichen